Desktop-level + engraving and cutting + all-in-one machine H

LaserPecker PRO desktop laser engraving machine supports engraving of non-metallic materials such as wood, leather, and plastic. It is equipped with an electric lifting bracket. The picture shows that the equipment is carving a wooden phone case. It is connected with a power cord and the whole machine has a complete structure.

The new ACMER P2 laser engraving machine, original packaging and complete accessories, is ready to use. Suitable for home and office engraving, the machine has not been used before. Delivery according to the map, free delivery in non-remote areas. South library

Costal 20W fiber laser marking machine 1064nm laser engraving machine idle low price quick out idle quick out a Costal 20W fiber laser marking machine/laser engraving machine. At that time, the actual payment for the purchase was 5818 yuan, and the purchase record was still there. After I bought it, I didn't actually use it much, but it has been idle since then. Now the studio cannot be used and takes up space, so it is sold at a low price to those who really need it. The equipment is a desktop fiber laser marking machine, 20W, 1064nm, suitable for marking and carving of metals, hardware, nameplates, jewelry, tools, etc. The overall storage of the machine is okay, with traces of normal use and storage. The parameter paper and the nameplate on the machine are still there. Special explanation of the machine status: The machine was idle after normal use before. Because I left it for a while, I no longer know how to operate this machine myself. I have almost forgotten the software and parameters. I have not reconnected the computer to complete the test marking function recently, so it is now sold as idle. It's not that the machine is broken, it's that I'm too lazy to rework the entire software and debugging. The original USB flash drive has not been found yet, so it is sold without USB flash drive by default. If you find it later, you can give it together. It is best for buyers to understand laser marking equipment themselves, or have relevant technicians to handle the software, drivers, and parameters themselves. Machines are relatively large and heavy, and transportation of precision equipment is also more troublesome. Therefore: Contact us near Hangzhou to help send it to the world. You can look at the machine in person, look at the appearance and nameplate. Those who need logistics in other places can also negotiate. It is recommended to go through large-scale logistics/wooden packaging, and the buyer will bear the freight and packaging costs. Because it is an idle machine, my goal now is to get rid of the vacant place as soon as possible. The price has been treated as second-hand idle. If I sincerely want it, I can talk and discuss it quickly. Those who mind the following circumstances: no teaching, no installation and debugging, no guarantee of the original USB flash drive, and not suitable for Xiaobai who does not understand the equipment at all. Those who understand machines can take them away directly at the right price. They can contact us first and help send them to the world.

Jingyan 4030 Desktop CNC Engraving Machine Jingyan 4030 Desktop CNC Engraving Machine, sixth-generation model, with 800W spindle, square rail structure, with shelves, normal functions, can be used for engraving metal, wood, acrylic and other materials. The fuselage has traces of normal use and local rust, and the overall structure is complete. I bought the second-hand one at that time, but I had only used it a few times. After a long time, I forgot how to use it when I was not at my level. I rarely used it when I was idle. Friends who know the industry can buy it. Just contact us to help send goods to the world without express delivery

Resold Jingmei M3040 engraving machine, 1.5KW spindle, square rail + ball screw, with limit limit, support for returning to the origin, normal function, unrepaired, complete accessories. I bought it on Taobao in April 2026. The original price was more than 4000 yuan. I didn't use it much. The color is good. It is suitable for processing metal, carpentry, jade, aluminum alloy, PCB, acrylic, etc. It can be used for DIY, carpentry, and metal processing. It is simple to operate and plug-in and ready to use. Support and contact us to help send it to the world, send it to other places (postage is based on actual cost), chat about the price, like private chat, and send detailed pictures.

LICUOMAO desktop CNC engraving machine LICUOMAO brand desktop CNC engraving machine, all-cast iron structure, three-axis linkage design, equipped with spindle, guide rail and motor, suitable for processing metal, wood, acrylic and other materials. The whole machine is stable and suitable for professional or semi-professional use scenarios.

xTool M1 Ultra 10W laser engraving machine, the color is okay, it is in normal use, purchased in April 2025, the working time is about 20 hours, the number of times is about 78, the equipment is fine, the functions are easy to use, suitable for fine carving, marking, etc., see the specific parameters. Some accessories are put in the video. The video was taken on the evening of August 27, including the operation of the machine and the cut items. The official packaging box is still there, and the use time is very short. It is basically new. The main reason is that I want to change the machine and choose to sell it. Individuals cannot play the role of the machine. The inkjet module was not purchased at the time, so there is no one here. Two color rubber sheets need to be purchased by customers themselves. There are seven pens. One of them forgot to close the lid, so they couldn't write, and the rest were not used. Give away about 20 linden boards and 8-10 key pendants. Creative partners can start. Please read them carefully before purchasing. Returns are not supported. Delivery will be carried out before September 5 at the latest. The parts will be packaged and shipped. The machine is heavy and the customer needs to bear the postage.

Laser engraving machine, 40*40cm, 50W, acceptable color, normal functions, complete accessories, control panel, simple operation, can be used by novices, fast carving speed, acrylic, wooden, glass painting, hammer painting, leaf carving can be engraved, DIY handwork, stall setting, and customization are all suitable! Complications: glass (large, medium and small), gift box (red gift bag *8, blue, powder) photo frame (charging *6, plug-in *10, non-electricity *2), gift bag (large, small), glass base (large *9 medium *9 small *6 charging and plug-in) writing frame, leaf lanyards (about 30 pieces), cutting plates, plastic laminating machine for free delivery! Tongcheng can contact us and help send it to the world! But Xiao Dao likes to take pictures directly and chat about details privately ~

The LaserPecker 2nd generation laser engraving machine has 10W blue light. It has fast engraving speed and supports mobile phone computer operation. The software is simple and can be easily used by novices. The maximum carving area is 1060*1060mm, and sliding carving can be done, and the 2-meter-long picture is no problem. More than 200 materials can be processed, including wood, leather, acrylic, stone, metal, and ceramics. DIY customization and batch carving are suitable. Electric lifting design allows objects of different heights to be carved. It has integrated galvanometer. The body is small and can be used offline, with high efficiency. The accessories are complete and the instructions are available. Support contact us and you can help send them to the world with free shipping. The price is easy, I like to take pictures directly, and chat about details privately ~

Resell Jingmei M3040 square rail engraving machine, 1.5KW spindle, square rail + ball screw, support return to the origin, limit model. Purchased it on Taobao in June 2025. The original price was more than 4,000 yuan. The factory was idle. The quality was very good. I didn't use it much. The functions were normal and the accessories were complete. Processing metal, non-metal, woodworking, jade, aluminum alloy, PCB, acrylic and other materials with high precision, suitable for DIY, woodworking, metal processing and other scenarios. Easy to operate, plug in and use, with limits, suitable for novices and experienced friends. Free delivery. Nanjing local support can contact us to help send it to the world. Prices can be chatted. If you like to chat privately, details can be sent. Sold without refund or replacement.

Resell Xiabu 3020 laser engraving machine, 50W high-quality, bought it on Taobao in November 2000, the original price is more than 2,000 support for engraving stamps, leaves, acrylic, leather, paper, plastic, etc., the thickness is 0-20mm, the carving and cutting speed is fast, the precision is high, and the operation is simple. The machine can also be used by novices. The machine size is 80*50*22cm and weighs 38kg. It is water-cooled. It supports Win7/8/10/XP is suitable for manual DIY, small studios, and makers. Good color and normal functions. Contact us without much support to help send it to the world. I like to chat privately. Please send it to 15385349622 for details.

Desktop CNC engraving machine four-axis engraving machine MACH3 system can be used with a computer. 2.2kw water-cooled spindle. Spindle power 2.2kw, model 6090. The machine is new in color, has normal functions, and has not been repaired. It is suitable for processing woodworking, metal, acrylic, jade and other materials. It is simple to operate and can be used by novices. The machine is heavy, so it is recommended to contact us to help send it to the world or contact logistics.

Desktop engraving machine, 57 stepper motor, 1605 ball screw and slider, all-aluminum alloy body, ok color, normal function. Suitable for DIY, carving and polishing small pieces. Contact us to help send to the world without a spindle

A personal carver C1 laser engraving machine is almost brand new, with all accessories, supports mobile phone computer operation, folds and is suitable for carving leaves, leather and wooden boards. It is simple to operate and can be used by novices. Free delivery.

40W all-in-one laser engraving machine, portable model, with LCD screen and handheld, gray shell, built-in battery, power display, complete interface with two batteries, the machine is ok in color, some traces of use, normal functions, not repaired, carving speed is fast, the effect is clear, the sound is small, suitable for carving wooden boards, density boards, paint panels, ceramics, stainless steel and other materials. It can be used in home factories. It is easy to operate, supports offline operation, can be connected to mobile phones and computers, Bluetooth pairing, Parameters can be adjusted to chat privately if you like, ask me for details